Case Studies

Customer profile: CORAB - the leader in the Renewable Energy Sources industry, designs and constructs photovoltaic farms delivering their photovoltaic systems worldwide.
We provided Corab company with several various applications. HERE is another case study of Corab solutions. 
  Customer’s pains and project expectations:  The

Customer profile: Green Cubes is an US company designing electric forklifts. We have used Q-Bat to help Green Cubes Technology optimize their forklift battery packs for optimal heat removal during rapid charging. The customer was seeking a solution to develop technology for fast charging in short bursts (so-called opportunity charging). We helped Green Cubes to find a cooling

We have developed numerical software for studying 3-phase flow in the wellbores. Both simulation algorithms and the GUI developed for Flowpro AS from Norway.

  Customer profile: FlowPro is a Norweigan company providing software for inflow control for petroleum industry.

We have developed numerical software (both simulation algorithms and the GUI) for studying 3-phase flow in the wellbores.

Customer profile: Nuncats CIC is a British aircraft company, providing electric aircraft transportation systems in order to replace the petrol engine and fuel tanks. The electric aircrafts designed and built by Nuncats are based on batteries, supported by solar charging stations on the ground.

Customer profile: CORAB - the leader in the Renewable Energy Sources industry, designs and constructs photovoltaic farms delivering their photovoltaic systems worldwide.
We started working with Corab long before the applications were developed. We started with aerodynamic and strength simulations of individual structures per PV panel. We also ran experimental

According to emission norms, combustion of the syngas must provide that each gas particle travels for more than 2 seconds in the regions above 850 degrees C. We have done CFD simulations and modified the combustion chamber with our British customer to guarantee that.

We have helped a German car maker bring Q-Bat to the simulation workflow. Q-Bat imports CFD meshes and generates a Simulink block for vehicle-level simulations. Still 3-D and very quick.